spec no: dsao0678 rev no: v.2a date: jul/18/2016 page: 1 of 6 approved: wynec checked: allen liu drawn: w.q.zhong erp: 1 201004172 3.5x2.8mm surface mount led lamp part number: AA3528SURCKT-AMT hyper red description the hyper red source color devices are made with al- gainp on gaas substrat e light emitting diode. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice . 4.the device has a single mounting surface. the device must be mounted according to the specifications. features z industry standard plcc-2 package. z high reliability led package. z wide viewing angle. z single color. z suitable for all smd assembly and solder process. z available on tape and reel. z ideal for backlighting. z package : 2,000pcs / reel. z moisture sensitivity level : level 3. z rohs compliant. applications z traffic signaling. z backlighting (illuminated adver tising , general lighting). z interior and exterior automotive lighting. z substitution of micro incandescent lamps. z reading lamps. z signal and symbol luminaire for orientation. z marker lights (e.g. steps, exit ways, etc). z decorative and entertainment lighting. z indoor and outdoor commercial and residential architectural lighting.
spec no: dsao0678 rev no: v.2a date: jul/18/2016 page: 2 of 6 approved: wynec checked: allen liu drawn: w.q.zhong erp: 1 201004172 selection guide part no. emitting color (material) lens type iv (mcd) [2] @ 20ma v iewing angle [1] code. min. max. 2 1/2 AA3528SURCKT-AMT hyper red (algainp) water clear p 200 300 120 q 300 400 r 400 500 *h *55 *80 *m *80 *120 *n *120 *200 s 500 700 *p *200 *300 absolute maximum ratings at t a =25c parameter symbol value unit power dissipation p d 75 mw reverse voltage v r 5 v junction temperature t j 115 c operating temperature top -40 to + 1 0 0 c storage temperature ts t g -40 to + 11 5 c dc forward current i f 30 ma peak forward current [2] i fm 185 ma electrostatic dischar ge threshold (hbm) 3000 v thermal resistance (junction/ambient) [1] r th j-a 410 c/w electrical / optical characteristics at t a =25c parameter symbol value unit wavelength at peak emission i f =20ma [typ.] peak 645 nm dominant wavelength i f =20ma [min.] dom [1] 620 nm dominant wavelength i f =20ma [max.] dom [1] 640 nm spectral bandwidth at 50% rel max i f =20ma [typ.] ? 28 nm forward voltage i f =20ma [min.] v f [2] - v forward voltage i f =20ma [typ.] 1.95 forward voltage i f =20ma [max.] 2.5 reverse current (v r = 5v) [max.] i r 10 ua temperature coefficient of peak i f =20ma, -10c t 100c [typ.] tc peak 0.13 nm/c temperature coefficient of dom i f =20ma, -10c t 100c [typ.] tc dom 0.06 nm/c temperature coefficient of v f i f =20ma, -10c t 100c [typ.] tc v -2.8 mv/c notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity / luminous flux: +/-15%. * luminous intensity value is traceable to cie127-2007 standards. notes: 1. rth(j-a) results from mounting on pc board fr4 (pad size 16 mm 2 per pad), 2. 1/10 duty cycle, 0.1ms pulse width. 3. relative humidity levels maintained between 40% and 60% in pr oduction area are recommended to avoid the build-up of static electricity ? ref jedec/jesd625-a and jedec/j-std-033. notes: 1.the dominant wavelength ( d) above is the setup value of the sorting machine. ( tolerance d : 1nm. ) 2.forward voltage: +/-0.1v. 3.wavelength value is traceable to cie127-2007 standards. 4.excess driving current and/or operating temperature higher t han recommended conditions may result in severe light degradation or premature failure.
spec no: dsao0678 rev no: v.2a date: jul/18/2016 page: 3 of 6 approved: wynec checked: allen liu drawn: w.q.zhong erp: 1 201004172 hyper red AA3528SURCKT-AMT
spec no: dsao0678 rev no: v.2a date: jul/18/2016 page: 4 of 6 approved: wynec checked: allen liu drawn: w.q.zhong erp: 1 201004172 recommended soldering pattern (units : mm; tolerance: 0.1) tape specifications (units : mm) reel dimension reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. AA3528SURCKT-AMT
spec no: dsao0678 rev no: v.2a date: jul/18/2016 page: 5 of 6 approved: wynec checked: allen liu drawn: w.q.zhong erp: 1 201004172 packing & label specifications AA3528SURCKT-AMT terms and conditions for the usage of this document 1. the information included in this docum ent reflects representative usage scenarios and is intended for technical reference on ly. 2. the part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. before production usage customer should refer to the latest datasheet for the updated specifications. 3. when using the products referenced in this document, please make sure the produc t is being operated within the environmental and electrical limits specified in the dat asheet. if customer usage exceeds the spec ified limits, kingbright will not be respon sible for any subsequent issues. 4. the information in this document applies to typical usage in consumer electronics applicati ons. if customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with kingbright representative for further assistance. 5. the contents and information of this document may not be reproduced or re-transmitted without permission by kingbright. 6. all design applications should refer to kingbright application notes available at http://www.kingbrightusa.com/applicationnotes
spec no: dsao0678 rev no: v.2a date: jul/18/2016 page: 6 of 6 approved: wynec checked: allen liu drawn: w.q.zhong erp: 1 201004172 reliability test items and conditions the reliability of products shall be sa tisfied with items listed below lot tolerance percent defective (ltpd) : 10% no. test item standards test condition test times / cycles number of damaged 1 continuous operating test - ta =25c ,if = maximum rated current* 1,000 h 0 / 22 2 high temp. operating test eiaj ed- 4701/100(101) ta = 100c if = derated current at 100c 1,000 h 0 / 22 3 low temp. operating test - ta = -40c, if = maximum rated current* 1,000 h 0 / 22 4 high temp. storage test eiaj ed- 4701/100(201) ta = maximum rated storage temperature 1,000 h 0 / 22 5 low temp. storage test eiaj ed- 4701/100(202) ta = -40c 1,000 h 0 / 22 6 high temp. & humidity storage test eiaj ed- 4701/100(103) ta = 60c, rh = 90% 1,000 h 0 / 22 7 high temp. & humidity operating test eiaj ed- 4701/100(102) ta = 60c, rh = 90% if = maximum rated current* 1,000 h 0 / 22 8 soldering reliability test eiaj ed- 4701/100(301) moisture soak : 30c,70% rh, 72h preheat : 150~180c(120s max.) soldering temp : 260c(10s) 2 times 0 / 18 9 thermal shock operating test - ta = -40c(15min) ~ 100c(15min) if = derated current at 100c 1,000 cycles 0 / 22 10 thermal shock test - ta = -40c(15min) ~ 100c(15min) 1,000 cycles 0 / 22 11 electric static discharge (esd) eiaj ed- 4701/100(304) c = 100pf , r2 = 1.5k ? v = 3000v once each polarity 0 / 22 12 vibration test - a = 196m/s2 , f = 100~2khz , t = 48min for all xyz axes 4 times 0 / 22 * : refer to forward current vs. derating curve diagram items symbols conditions failure criteria luminous intensity lv i f = 20ma testing min. value |
